Drawn a picture.
Converted it with Image2BBC. It export a file and an .inf file.
Halted here.
I really dunno how to add the picture on the .ADL disk I'm using with BeebEm. I've found a number of .sdd managers, but nothing for ADFS so far (or nothing I could understand, anyway).
Beeb Image seems to properly transfer the file, but then °LOAD PIC 3000 do nothing (I'm doing something wrong for sure).
Point by point guide in exchange for my gratitude.
Picture to .ADL
-
- Posts: 10
- Joined: Sat Jul 16, 2022 6:00 pm
- Contact:
Re: Picture to .ADL
These steps worked for me:
1) open BBC Micro Image Conterter, load in the .png File -> Save as -> BBC Micro screen dump
2) Open .adl file in Beeb Image (http://www.cowsarenotpurple.co.uk/beeb-image.html)
3) Press Add Files from Host -> select the 20kb file not the INF from step 1
4) Edit the Load Address to be FFFF3000
5) Save Image
6) open adf/adl image in BeebEM, ctrl-a-break, MODE 2, *LOAD img
just FYI, if you switch to using DFS rather than ADFS you can use beebem's built in file transfer.
1) open BBC Micro Image Conterter, load in the .png File -> Save as -> BBC Micro screen dump
2) Open .adl file in Beeb Image (http://www.cowsarenotpurple.co.uk/beeb-image.html)
3) Press Add Files from Host -> select the 20kb file not the INF from step 1
4) Edit the Load Address to be FFFF3000
5) Save Image
6) open adf/adl image in BeebEM, ctrl-a-break, MODE 2, *LOAD img
just FYI, if you switch to using DFS rather than ADFS you can use beebem's built in file transfer.
Electron (+1, +3, AP5)
Electron (RH +1, Pegasus)
BBC B 1770, boobip, Acorn Speech,Econet)
BBC B+ 128k (Acorn Speech)
Master 512 (ARA III, VideoNuLA, Econet)
PiTubeDirect, RGBtoHDMI, Pi1MHZ
Master Compact (Econet)
Econet: RiscPC 700 / A3020 / A3000
Electron (RH +1, Pegasus)
BBC B 1770, boobip, Acorn Speech,Econet)
BBC B+ 128k (Acorn Speech)
Master 512 (ARA III, VideoNuLA, Econet)
PiTubeDirect, RGBtoHDMI, Pi1MHZ
Master Compact (Econet)
Econet: RiscPC 700 / A3020 / A3000
-
- Posts: 10
- Joined: Sat Jul 16, 2022 6:00 pm
- Contact:
Re: Picture to .ADL
You're very kind!
I found I was doing right, you helped me to double check it, the issue was... just a soft break after Welcome disk .
I dunno if Welcome or the Sprite ROM relocate VRAM, anyway the effect of *LOAD was just a dumb > prompt.
Now it work as it should.
Thank you!
- geraldholdsworth
- Posts: 1406
- Joined: Tue Nov 04, 2014 9:42 pm
- Location: Inverness, Scotland
- Contact:
Re: Picture to .ADL
Doesn't Image2BBC output to ssd?
You can also use Disc Image Manager to import files to/from ssd or adl (or many other formats).
You can also use Disc Image Manager to import files to/from ssd or adl (or many other formats).
Gerald Holdsworth, CTS-D
Extron Authorised Programmer
https://www.geraldholdsworth.co.uk
https://www.reptonresourcepage.co.uk
Twitter @radiogezza
Extron Authorised Programmer
https://www.geraldholdsworth.co.uk
https://www.reptonresourcepage.co.uk
Twitter @radiogezza