The Master List for New Retro Hardware

[Elminster]

Added:

- FreeFi-232 v2
- RGB to HDMI Adaptor
- Cartridge Breakout Board

[Elminster]

Added:

Tricky's Joystick Adaptor
Tricky's Compact SD Card Project

[Elminster]

Recent changes.

- Beeblink Added
- I-squared-C Updated to say 'User/Analogue Port'

Let me know of any more new project. Aware of Mr Judgebeeb's ROM project but not sure I have enough info (or if he wants it on) to add that yet.

[Elminster]

Added:

- Atari Joystick Interface (up to 3 now)
- Pi to 1MHz interface
- BBC2DVI Interface

[Elminster]

Updates:
- ATOM HDMI changed from 'in development' to Y
- DataCentre Production Status changed from Y to N

Added:
- Dominic’s 1Mhz Breakout Board
- Ramtop’s Electron SD Card Interface
- Ramtop's Electron MicroSD Card Interfaces

[Elminster]

Added:

Music 5000 Clone (jasonl)
1mhz FPGA board (hoglet)
Atom 2k18 (Roland)

https://elminster.github.io/hardware

[Elminster]

Added:

- Electron Plus 1 ROM emulaion and SD inerface using an STM32F4
- Ulimate Electron Upgrade aka ULA replacement

[Elminster]

Added:

- Computer Concept PALROM redesign by KenLowe
- Integra-B Remake by KenLowe
- Design #4 (aka M5000 stm32 controller) by danielj

Updated:
- Atom RAM/ROM by Prime
- Atom Colour Board by Prime

[Elminster]

Always seem to be missing some piece of hardware.

Added:
Acorn Econet Clock v2 - simoni

[Elminster]

Fixed:
Fixed URL for Kernel Crash Music 5000

Update:
STM32 -> Beeb -> Music 5000, name and URL

Added:
Retroclinic Micro SPI MMC

[anightin]

I've just built one of these that I had in kit form:

https://obsolescence.wixsite.com/obsole ... mary-c1uuh

Nice little pocket toy for playing with 6502 assembler, and/or pretending you're using a circa 1976 KIM-1

... thinking '6502 SBC Kits' section, even if it is a bit of a cheat:

[Elminster]

The idea of that section is that it is a real 6502 (I suppose I might bend that one day) and that you could perhaps get it running the MOS from the Acorn ATOM or SYSTEM 1, Or something along those lines.

KIM 1's tend to be documented over on 6502.org i.e.

http://www.6502.org/trainers/

But if you can get ATOM or SYSTEM 1 running on it...........

Edit: Perhaps I shall put that on the page (A SBC where you could potentially run a minimal Acorn system)

Edit2: Although as people so rarely ask me to add anything to the list I am almost tempted

[Elminster]

Latest updates:

- Tricky SEGA Joypad Adapor
- bprosman Godil 50 o 40 pin adaptor
- Ramtop's latest SD Card and SRAM Interface

[Elminster]

Added:
Flynnjs:

• Beebscsi Mini (Not available any more but added for completeness as missing)

• Femto Flash Floppy

Jasonl:

• Music 4000

• Music 2000

Updated:
Jasonl:

• Music 5000 to Music 5000/3000

[Elminster]

Added:
27C400/800/160/320 emulator/ROM switcher

Update:
URL for ATOMSID 1.8

[Elminster]

As requested by Wheel Nut. Added

- Parallel Port version of MMFS SDCard

[Elminster]

Added:

SD Interface for Plus 1 - Ramtop
HOSTFS+TCPIP - dominicbeesley

[Elminster]

Been a bit slow recently. Halfway through the new projects I have identified. So far Added:

Electron ULA Basic Board (Budgie)
User Port Extender / SD Card Reader Interface (KenLowe)
New Raspberry Pi to 1MHz bus interface (KenLowe)
New SCSI Host Adaptor (KenLowe)
IntegraB V2 (KenLowe)

[Elminster]

Getting there. Following added today:

- ArduinoFilestore
- E2P
- E2P RAM Expansion

[Elminster]

Added:

- BeebBot Clone (simoni)
- Electron Wifi (Roland)
- Atom Wifi (Roland)
- Atom Dual Serial Port (Roland)

Think I only have 'walkerworks' drum kit left to add.

[BigEd]

(
There's something up with the formatting of the linked Master List (for me, anyway), although it looks OK here:
https://github.com/elminster/elminster. ... n-electron
)

[Elminster]

Probably because I usually use lightpaper on a Mac, and latest updates were all done on Linux using VS Code. I blame Microsoft. The local editor previewer shows it as okay as well, so I didnt notice.

It will be a dodgy character somewhere I should think, always messes up the tables.

Will have a look thanks.

[Elminster]

(
There's something up with the formatting of the linked Master List (for me, anyway), although it looks OK here:
https://github.com/elminster/elminster. ... n-electron
)

Fixed thanks.

Lost a new line, which screws the table up.

[BigEd]

Thanks!

[Elminster]

Added:

Electron Synth Interface (walkerworks)
Electron User Port Splitter (walkerworks)
31-16 Master ROM Board (walkerworks)
RGB 6 to 1 Switch (walkerworks)

[Elminster]

Added:

new 3d print section to the list.

[Wheel_nut]

Ken Lowe's Tube Level Shifter (with power outlet for the 1MHz Bus adapter) is missing from your Master List. You will find it in Ken's 1MHz Bus RPI adapter thread.

Robin

[Elminster]

Naughty, an extra product in the same thread, okay thanks will add that.

[Elminster]

Added:

Ken's Tube Level Shifter

[Papalapa]

Incredible and up to date compilation, it's very useful for the new Acorn computer users like me.

Thank you for your job