I've been searching for something to do this - I'm sure there must be something out there - I just can't find it - yet...
Simply; I have a number of files on my Linux system I want to put/create on an SSD image so I can then use that image with an GoTek on a real beeb, or upload the image to e.g. https://bbc.godbolt.org/ which seems to allow SSD images...
Can some kind soul point me in the right direction?
Thanks,
-Gordon
Create SSD / DSD image from files under Linux?
- gordonDrogon
- Posts: 88
- Joined: Fri Nov 23, 2018 12:39 pm
- Location: Scottish Borders
- Contact:
Re: Create SSD / DSD image from files under Linux?
If yu are comfortable with command lines tools, then I would recommend Stephen (sweh)'s mmb_utils:
https://sweh.spuddy.org/Beeb/mmb_utils.html
- gordonDrogon
- Posts: 88
- Joined: Fri Nov 23, 2018 12:39 pm
- Location: Scottish Borders
- Contact:
Re: Create SSD / DSD image from files under Linux?
Looks just like what I need. Thankshoglet wrote: ↑Sat Feb 17, 2024 8:19 pmIf yu are comfortable with command lines tools, then I would recommend Stephen (sweh)'s mmb_utils:
https://sweh.spuddy.org/Beeb/mmb_utils.html
-G
Re: Create SSD / DSD image from files under Linux?
Alternatively, if you want a GUI based tool (that also has command line interface), you could also try Disc Image Manager. It runs under Windows, Mac and Linux:
https://github.com/geraldholdsworth/DiscImageManager
https://github.com/geraldholdsworth/DiscImageManager
- gordonDrogon
- Posts: 88
- Joined: Fri Nov 23, 2018 12:39 pm
- Location: Scottish Borders
- Contact:
Re: Create SSD / DSD image from files under Linux?
Thanks. Will have a look over the next few days as I'll be away from my desk with just a laptop and making something from a command-line tool is a good solution as I can incorporate it into a Makefile for the tiny project I'm working on so it means I can go from asm source, assemble (project uses ca65 from the cc65 suite), make an image, load image into emulator, test, rinse, lather, repeat..KenLowe wrote: ↑Sat Feb 17, 2024 10:43 pm Alternatively, if you want a GUI based tool (that also has command line interface), you could also try Disc Image Manager. It runs under Windows, Mac and Linux:
https://github.com/geraldholdsworth/DiscImageManager
cheers,
-Gordon
- geraldholdsworth
- Posts: 1401
- Joined: Tue Nov 04, 2014 9:42 pm
- Location: Inverness, Scotland
- Contact:
Re: Create SSD / DSD image from files under Linux?
You can also run Disc Image Manager in a command line. Either type in commands, or create a script in a text editor and run that.
Gerald Holdsworth, CTS-D
Extron Authorised Programmer
https://www.geraldholdsworth.co.uk
https://www.reptonresourcepage.co.uk
Twitter @radiogezza
Extron Authorised Programmer
https://www.geraldholdsworth.co.uk
https://www.reptonresourcepage.co.uk
Twitter @radiogezza