Atom RGBtoHDMI 3D printed case

[LinuxJedi]

No sure if it is useful to anyone, but I knocked up a prototype 3D printed case for the RGBtoHDMI today. If people want it, I can refine it and 3D print it for them and/or make the STL available.

[thecellartroll]

make the STL available.

I would very much appreciate the stl for this

[LinuxJedi]

Attached. I'll have printed ones available next week too, just working on having a proper large label printed for it, I won't get access to the product labelling machine until Monday.

The top of the hole for the reset button might sag slightly during printing and may need a bit of filing afterwards so the reset button doesn't get stuck on it. PCB doesn't need screwing in with the latest version, the two halves press-fitted together hold it in tightly. I recommend using M3 self-tapping screws of 8mm or higher in length to hold the two halves together. I also use 3M bumpons underneath the completed box just to stop it sliding around.

[thecellartroll]

Thank you very much! I shall add it to my extensive print queue