Atom Case
Re: Atom Case
Ok guys, here are the DWG, STL and STEP files of the split Atom case.
Greetings
Kees
Greetings
Kees
- Attachments
-
- Atom split case STP.zip
- (538.16 KiB) Downloaded 67 times
-
- Atom split case STL.zip
- (268.46 KiB) Downloaded 65 times
-
- Atom split case DWG.zip
- (1.18 MiB) Downloaded 65 times
-
- Posts: 1090
- Joined: Thu Nov 24, 2011 10:43 pm
- Location: Lanark, Central Scotland
- Contact:
Re: Atom Case
Damn! Looks like it is every-so-slightly too big for the build plate on my Eryone ER20
Re: Atom Case
So you need a six part case ......thecellartroll wrote: ↑Sun Jan 23, 2022 7:35 pm Damn! Looks like it is every-so-slightly too big for the build plate on my Eryone ER20
Greetings
Kees
-
- Posts: 1090
- Joined: Thu Nov 24, 2011 10:43 pm
- Location: Lanark, Central Scotland
- Contact:
Re: Atom Case
The trick’s to print vertically if you can, it works fine.
Ade
- daveejhitchins
- Posts: 7888
- Joined: Wed Jun 13, 2012 6:23 pm
- Location: Newton Aycliffe, County Durham
- Contact:
Re: Atom Case
With a Very Good Raft!!
Dave H.
Available: ARA II : ARA III-JR/PR : ABR : AP5 : AP6 : ABE : ATI : MGC : Plus 1 Support ROM : Plus 3 2nd DA : Prime's Plus 3 ROM/RAM : Pegasus 400 : Prime's MRB : ARCIN32 : Cross-32
Re: Atom Case
It feels more apt that an Atom case should only ever be printed in 8 bits...
I run a little online shop called "Vintage Imitation Parts" to sell a few Acorn Archimedes and BBC Micro related bits and pieces, such as my imitation keyboard surrounds and just recently my imitation function strips.
Take a look! vintage.imitation.parts
Take a look! vintage.imitation.parts
Re: Atom Case
Can you publish the printer setting ? Resolution, temperature etc to learn from ?had not enough from the same PLA due trail and error ) and resolution. The right one is printed with a hire resolution.
Re: Atom Case
Pretty pleaseoss003 wrote: ↑Sun Jan 23, 2022 7:53 pmSo you need a six part case ......thecellartroll wrote: ↑Sun Jan 23, 2022 7:35 pm Damn! Looks like it is every-so-slightly too big for the build plate on my Eryone ER20
Greetings
Kees
-
- Posts: 1090
- Joined: Thu Nov 24, 2011 10:43 pm
- Location: Lanark, Central Scotland
- Contact:
Re: Atom Case
A 24 bit Atom. Whatever next?
(I’ve not worn out that joke quite yet)
I run a little online shop called "Vintage Imitation Parts" to sell a few Acorn Archimedes and BBC Micro related bits and pieces, such as my imitation keyboard surrounds and just recently my imitation function strips.
Take a look! vintage.imitation.parts
Take a look! vintage.imitation.parts
-
- Posts: 1090
- Joined: Thu Nov 24, 2011 10:43 pm
- Location: Lanark, Central Scotland
- Contact:
Re: Atom Case
I run a little online shop called "Vintage Imitation Parts" to sell a few Acorn Archimedes and BBC Micro related bits and pieces, such as my imitation keyboard surrounds and just recently my imitation function strips.
Take a look! vintage.imitation.parts
Take a look! vintage.imitation.parts
Re: Atom Case
It worked perfectly on an ender, slight issue with one edge rising slightly which I’ll sort on the next go.thecellartroll wrote: ↑Mon Jan 24, 2022 6:12 pmIt fits on the build-plate vertically but unfortunately it is a little too tall that way.
Ade
Re: Atom Case
Does somebody want to try the JLCPCB 3D printing service ?
I just uploaded the design to see what the costs would be and whether they reject the design or not. It does look like they can print it.....
Shipping costs and taxes will be added to this price.
I just uploaded the design to see what the costs would be and whether they reject the design or not. It does look like they can print it.....
Shipping costs and taxes will be added to this price.
FPGAtom: 512 KB RAM, Real Time Clock and 64 colours
MAN WOMAN
MAN WOMAN
Re: Atom Case
Way to much Roland , I printed the case with only one filament, Cost 19.95 euro and lots of time to print it
Re: Atom Case
Sorry to kick an older topic, how did you print the top part ?
Top part flipped , top facing the build plate ?
Any support used ?
Kind regards, Bram
//Edit, questions answered at ABUG NL
Re: Atom Case
Hello Bram,
I did print side ways, this way you don't need to print the support for it. I sliced the cover with the slicing software in windows 10 & 11, precisely in the middle and melted some long nales in the case for supporting the top case and also the bottem.
With kind regards Erik
I did print side ways, this way you don't need to print the support for it. I sliced the cover with the slicing software in windows 10 & 11, precisely in the middle and melted some long nales in the case for supporting the top case and also the bottem.
With kind regards Erik
Re: Atom Case
My first "Quarter" printed (PLA-Blue) according to Kees' latest designs.
Usually I work with PetG, this was my first PLA attempt, but the bottom is quite a flat surface, and PLA is less prone to warp.
Quite impressed to be honest, up to the next coming weekend, curious how they will fit together.
In reality the back is more smooth than the pictures show. Actually "retestrak" to use a Dutch term
And the particles on the bottom are not print imperfections but breadcrumbs
Very happy with this first try.
Usually I work with PetG, this was my first PLA attempt, but the bottom is quite a flat surface, and PLA is less prone to warp.
Quite impressed to be honest, up to the next coming weekend, curious how they will fit together.
In reality the back is more smooth than the pictures show. Actually "retestrak" to use a Dutch term
And the particles on the bottom are not print imperfections but breadcrumbs
Very happy with this first try.
-
- Posts: 1090
- Joined: Thu Nov 24, 2011 10:43 pm
- Location: Lanark, Central Scotland
- Contact:
Re: Atom Case
That is a very nice print! I’m looking forward to seeing the whole thing.
- Multiwizard
- Posts: 2670
- Joined: Wed Jan 11, 2012 9:03 pm
- Contact:
Re: Atom Case
Looks really good...
So actually, asstight in English terms...
Re: Atom Case
Getting there.
Re: Atom Case
Nice .....
- Multiwizard
- Posts: 2670
- Joined: Wed Jan 11, 2012 9:03 pm
- Contact:
Re: Atom Case
Looks good...
Re: Atom Case
Try Prusa Slicer, that will let you split a model and keep both halves , so something like this you could split it down the exact middle (by measurement) then stand the two halves up on edge and print together
BBC Bs, Master 128s, Master Compact, and Electrons, and an A3000 with an ARM3
Don’t Panic and Always Carry a Towel
Don’t Panic and Always Carry a Towel
Re: Atom Case
Kees already changed and published adapted STL files, with the case split in 4, and having tabs (as you can see in my pictures) to glue the parts together.
Re: Atom Case
Some more progress. The 2 top parts are not glued together here.
Some small imperfections left where Kees will help.
Some small imperfections left where Kees will help.